New SLP owner in DFW needs bodyshop recommendations
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Location: Ft. Worth
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
New SLP owner in DFW needs bodyshop recommendations
Hello from Ft. Worth.
I have recently purchased a 2002 SLP SS M6 Black/Ebony/CME. This car has only 31K and I bought it from the original owner (have seen the "birth certificate"). About 5 years ago it was in an accident and has been in storage since then.
I bought it to steal the drivetrain and part out but this is a nice enough car to check into getting it fixed.
I need recommendations for DFW area body shops that specialize in F-bodies. Are there any?
This car has been hit in the driver side rear. The unibody has been crushed into the left rear wheel arch. None of the suspension points seem to have been involved. This car will need a rear clip or a partial clip; the passenger side may be usable.
The body shop will need to be familiar with major reconstruction work.
Any suggestions?
Thanks
Rick
I have recently purchased a 2002 SLP SS M6 Black/Ebony/CME. This car has only 31K and I bought it from the original owner (have seen the "birth certificate"). About 5 years ago it was in an accident and has been in storage since then.
I bought it to steal the drivetrain and part out but this is a nice enough car to check into getting it fixed.
I need recommendations for DFW area body shops that specialize in F-bodies. Are there any?
This car has been hit in the driver side rear. The unibody has been crushed into the left rear wheel arch. None of the suspension points seem to have been involved. This car will need a rear clip or a partial clip; the passenger side may be usable.
The body shop will need to be familiar with major reconstruction work.
Any suggestions?
Thanks
Rick
#2
9 Second Club
iTrader: (21)
Join Date: Mar 2008
Location: League City, Texas
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
My dad owns a bodyshop in arlington and he does great work. It's called Ground Zero Customs. Number is (817)226-3574 his name is Russell. Tell him Josh sent you and you're from ls1tech. He gives members I send better deals.
#6
On The Tree
iTrader: (1)
Join Date: Mar 2010
Location: Carrollton, TX
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Oh and here's a link to his fb pics of some of his customers cars to show some of his work
http://www.facebook.com/album.php?ai...&id=1796100907
http://www.facebook.com/album.php?ai...&id=1796100907
Trending Topics
#10
On The Tree
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Location: Ft. Worth
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies.
Have plenty to check out on Monday.
I've just about have the car down to basic sheet metal and am going to take a camara full of damage shots for ballpark estimates.
The #$%# CME is a serious pain to take apart without damaging it. Everthing has been real easy to deal with except that peice.....
Thanks again
Rick
Have plenty to check out on Monday.
I've just about have the car down to basic sheet metal and am going to take a camara full of damage shots for ballpark estimates.
The #$%# CME is a serious pain to take apart without damaging it. Everthing has been real easy to deal with except that peice.....
Thanks again
Rick