CDT Midbass driver wiring question
#1
Staging Lane
Thread Starter
CDT Midbass driver wiring question
I've had my Kee Audio CDT speaker package installed for a few months now, when I installed the sub replacements I noticed the stock speaker had four wires yet the CDT speaker only takes 2, do you need to use all four or just two? Im currently running all four. Thanks in advance. Travis.
#2
Banned
iTrader: (65)
What's up Travis? Don't I know you from the F-Body Gathering??
The CDT CL-6 midbass would be wired in a T/A using just one of the pairs of the 2. For that application you would just cap one pair off. This does result in a small loss in output volume of about -2db, which is small.
Running all 4 to one speaker probably doesn't sound too hot or your getting distortion from them. Shoot me an email at keeaudio@bellsouth.net and I can get you taken care of.
The CDT CL-6 midbass would be wired in a T/A using just one of the pairs of the 2. For that application you would just cap one pair off. This does result in a small loss in output volume of about -2db, which is small.
Running all 4 to one speaker probably doesn't sound too hot or your getting distortion from them. Shoot me an email at keeaudio@bellsouth.net and I can get you taken care of.