N20 Push questions!
#1
Launching!
Thread Starter
Join Date: Oct 2002
Location: Fort Collins, CO
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
N20 Push questions!
My first question is instead of drilling a hole in my bottle or buying a super hi flow valve can i use an adapter for say a nitrous gauge to feed the nitrogen into the bottle?
My other question is where can i purchase an nitrogen bottle and regulator from?
thanks much!
My other question is where can i purchase an nitrogen bottle and regulator from?
thanks much!
#2
TECH Fanatic
iTrader: (8)
Join Date: Jan 2003
Location: Maryland
Posts: 1,435
Likes: 0
Received 0 Likes
on
0 Posts
Nitrogen bottle and regulator at any welding supply company.
No you cant use the tap for a guage for the nitrogen cause then your N20 would never come out until the pressure equalized with the nitrogen then it would come out for a split second but then when the pressure dropped again you wouldnt have any more n20 flow.
No you cant use the tap for a guage for the nitrogen cause then your N20 would never come out until the pressure equalized with the nitrogen then it would come out for a split second but then when the pressure dropped again you wouldnt have any more n20 flow.