Slave / master cylinder question
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Texarkana, AR
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Slave / master cylinder question
My clutch started sticking to the floor after I let fluid get low so we filled and were going to bleed it. Well while waiting for that point now the Cluth will sometimes go down to the floor with no pressure behind it and the car is stuck in gear. I have to manually pop the clutch up and keep doing that until I feel some pressure behind it and then I can pull it out of gear. People r telling me more than likely a slave cylinder but unsure which one it could be. Any tips for finding where the problem lies or if this does sound like the situation.