WTB: 32#-36# injectors
03-17-2011, 10:35 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: Buffalo Grove, IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
WTB: 32#-36# injectors Doing a heads/cam upgrade on my LT1 and the 24# SVO's I have now won't be anywhere near adequate.
I can use anywhere from 32# to 36#.
I can use anywhere from 32# to 36#.
03-17-2011, 12:47 PM
#2
I have a set of Scott 30# injectors, would be like 36# on our cars. Less than 1500 miles. I can send pics tonight if you would like. I'll take 250 shipped including fees. Let me know. Thanks
03-18-2011, 12:10 AM
#4
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: Buffalo Grove, IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
But i'm up for pics. I'll PM you my address.
03-19-2011, 08:06 AM
#6
I have a set of stock LS2 injectors..around 33# I assume you would need some injector connector adapters if your connectors are the same as an LS1 and probably would need to swap o-rings to an LS1 assuming your prersent injectors are the same diameter as an LS1.
$45 shipped. missing 2 o-rings
$45 shipped. missing 2 o-rings
03-25-2011, 09:35 PM
#7
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2009
Location: Buffalo Grove, IL
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of stock LS2 injectors..around 33# I assume you would need some injector connector adapters if your connectors are the same as an LS1 and probably would need to swap o-rings to an LS1 assuming your prersent injectors are the same diameter as an LS1.
$45 shipped. missing 2 o-rings
$45 shipped. missing 2 o-rings
