slowlsx

iTrader: (28)

I am considering giving E85 a shot once my trucks is up and running since there are a few places that I have access to in houston. I'm running 80lb injectors at 60psi which is around 92lbs and dual 255 pumps with fast rails. Looking for 700rwhp on the stock lines. Who has done something similar to this and what r you guys making?? Also this a 2000 silverado.. Not sure if the stock limes are different from the F-body's

I tryed researching this but couldn't find much.

vaticano

iTrader: (8)

I used the stock lines in my car with 79# inj. and dual walboros and made about 750 corrected but with my altitude it's only about 630 uncorrected.

Lonnies Performance

iTrader: (16)

You may get by on the truck as the regulator is engine mounted. This helps to better control the rail pressure.