Help w/install Nasty Perf stage 3
#1
Teching In
Thread Starter
Join Date: Jun 2011
Location: Fishers IN
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Help w/install Nasty Perf stage 3
I purchased a stage 3 kit w/Lonnies twin pump from Nate at Nasty Performance and having some trouble figuring out how to hook it all up. The kit has absolutely no instructions (except for notes on zip baggies for the fittings) or diagrams so you have to figure this out pretty much on your own. I've ask Nate a few questions when I first got the kit and sent an email a couple of days ago about this with no answer.. maybe he's on vacation. So I have some questions.
1-Do I leave the purge line that hooks up to the module on the engine w/vacuum line and electrical connection and runs to the tank?
2-does the return line with the kit from the rail use the same location on the tank that the "T" from the feed line near the fuel filter goes to?
Anyone have pics who has done this before?
1-Do I leave the purge line that hooks up to the module on the engine w/vacuum line and electrical connection and runs to the tank?
2-does the return line with the kit from the rail use the same location on the tank that the "T" from the feed line near the fuel filter goes to?
Anyone have pics who has done this before?