Critique turbo LS6 fuel system
06-28-2011, 11:54 PM
#1
Critique turbo LS6 fuel system I'm putting the finishing touches on collecting parts for my turbo CTS-V build. So far I've got:
Stock cube LS6, forged rods and 9.5:1 pistons
Stock cam, better pushrods and springs
76mm turbo in the butt, trying to run about 15lbs.
Stock intake, stock rail and line
Just ordered 72lb injectors and a 340lph pump.
I'm planning on running stock pump and the 340 parallel on a hobbs switch for when the boost comes in. I figured 72lbers would be good for stock fuel pressure. Will the stock rail and fuel line be ok for my goals? I'm looking for 650 to 700.
Stock cube LS6, forged rods and 9.5:1 pistons
Stock cam, better pushrods and springs
76mm turbo in the butt, trying to run about 15lbs.
Stock intake, stock rail and line
Just ordered 72lb injectors and a 340lph pump.
I'm planning on running stock pump and the 340 parallel on a hobbs switch for when the boost comes in. I figured 72lbers would be good for stock fuel pressure. Will the stock rail and fuel line be ok for my goals? I'm looking for 650 to 700.
