Moser 9 Leak
07-07-2011, 10:44 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Moser 9 Leak Can any one explain to me how, to change the rear drive side seal and bearing out? or is there a website that give's you directions?
07-08-2011, 12:09 PM
#2
take the brakes off, and rotor off, loosen the 4 bolts that hold the axle retainer plate on, and pull out the axle. you can remove seal how ever you can, and I would get a bearing and seal installer driver kit to install new seal.
thats the basics...
thats the basics...
07-08-2011, 05:54 PM
#3
You may need to use a slide hammer to get the axle out, as axles sometimes need a little encouragement. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
07-09-2011, 09:22 AM
#4
TECH Enthusiast
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys for the input hopefully i can get the bearing and seal swapped out today, ill post later and let you know how it goes.
