Appearance & Detailing Interior & Exterior Appearance Modifications
Sponsored by:
Sponsored by: DashLynx

Anyone in Oklahoma wanna wrap my dash pad?

Thread Tools
 
Search this Thread
 
Old 08-12-2011, 12:06 AM
  #1  
TECH Enthusiast
Thread Starter
 
6898camaross's Avatar
 
Join Date: May 2011
Location: Catoosa oklahoma
Posts: 506
Likes: 0
Received 0 Likes on 0 Posts
Default Anyone in Oklahoma wanna wrap my dash pad?

I need someone to wrap my dash pad preferably near Tulsa or surrounding areas I will pay of course.
Old 08-12-2011, 01:06 AM
  #2  
Staging Lane
 
West Texas Blues's Avatar
 
Join Date: Jun 2009
Location: West Tex
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Default

you should do it yourself. i just finished mine a few days ago, i had absolutely no experience with fabrics or upholstery and finished the whole thing in less than two days. at first i was unsure about trying this but went ahead and found that wrapping the dash pad is VERY easy. i encourage you to tackle this project yourself unless you have time constraints or somethin'. if you do decide to give it a try just a word of advice: make certain you don't have any empty spots with the glue ( i had air bubbles to redo )
Old 08-12-2011, 01:15 AM
  #3  
TECH Enthusiast
Thread Starter
 
6898camaross's Avatar
 
Join Date: May 2011
Location: Catoosa oklahoma
Posts: 506
Likes: 0
Received 0 Likes on 0 Posts
Default

I have tried once and It looks like ****. Maybe I'm just a retard
Old 08-12-2011, 01:28 AM
  #4  
TECH Junkie
iTrader: (28)
 
whytryz28's Avatar
 
Join Date: Feb 2007
Location: Hawaii
Posts: 3,758
Likes: 0
Received 1 Like on 1 Post

Default

lmao ^^^^

What are you trying to wrap it in?
Old 08-12-2011, 02:06 PM
  #5  
Staging Lane
 
West Texas Blues's Avatar
 
Join Date: Jun 2009
Location: West Tex
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Default

i used outdoor stretch vinyl and 3m spray adhesive from walmart. start at the middle and work your way out to the edges. i just followed the write up in this forum (have you seen it?) and the instructions on the can of adhesive.
Old 08-12-2011, 10:56 PM
  #6  
Teching In
iTrader: (3)
 
CamaroLSwon's Avatar
 
Join Date: Aug 2009
Posts: 44
Likes: 0
Received 0 Likes on 0 Posts

Default

I'm getting ready to do this for my 97... How did you go about the vent area? That's my only concern, I'm not quite sure what I'll do in that spot. Pics please?




All times are GMT -5. The time now is 08:01 AM.