Feedback, Thoughts on this FMIC. Treadstone TR12 and TRST
#1
Banned
Thread Starter
iTrader: (7)
Join Date: Mar 2011
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Feedback, Thoughts on this FMIC. Treadstone TR12 and TRST
So i been looking at FMIC, Its a Treadstone, First question. Would this size fit? its a half in taller then what most people are running the cx racing. And half inch thicker. But length is a lil shorter. 12.5" X 22" X 4.5" core size. Over length is 30, So this is my first question would this fit just fine in my TA? or would i have more issues with it?
Second questions what are the thoughts on the divided inlet? will this help?
Also claims 1.5 psi drop? Is this bad.
It claims good up to 1k?
here is the actual listing i was looking at.
Here,
Oh ya one last question. About mounting. I see mounting on this one is on the side? think making up a bracket something like the procharger one would work?
Any thoughts and opinions will be appreciated, Thanks
Second questions what are the thoughts on the divided inlet? will this help?
Also claims 1.5 psi drop? Is this bad.
It claims good up to 1k?
here is the actual listing i was looking at.
Here,
Oh ya one last question. About mounting. I see mounting on this one is on the side? think making up a bracket something like the procharger one would work?
Any thoughts and opinions will be appreciated, Thanks
Last edited by FlipediS; 08-24-2011 at 07:04 PM.
#2
Banned
Thread Starter
iTrader: (7)
Join Date: Mar 2011
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Also one more i was curious about there trst model? On there site it says for camaro guys and trans am? do these work with the fbodys? with a procharger? anyone use this type of set up?
Here,
With the outlet over the top of radiator? If so anyone have any pictures?
Here,
With the outlet over the top of radiator? If so anyone have any pictures?
#4
Banned
Thread Starter
iTrader: (7)
Join Date: Mar 2011
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Thanks? the biggest one? are you talking about the TRV259 The vertical one? I was actually wondering if anyone knew if it would fit its the one i would really like to use.
its 26.50" X 15.00" X 3.50" I know most people use 24x12x4 , Anyone that installed one of them think there was Enough room to bigger?
its 26.50" X 15.00" X 3.50" I know most people use 24x12x4 , Anyone that installed one of them think there was Enough room to bigger?
#5
LS1Tech Sponsor
iTrader: (16)
The CX Racing one is known to fit, and fit well, why not go with it? Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#6
Banned
Thread Starter
iTrader: (7)
Join Date: Mar 2011
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Im considering the cxracing one. But i thought the treadstone ones where better Quality? Plus would like to get a vertical on if possible. I been leaning towards the TRV259, And was curious if anyone has ran on. And what it took to get it to fit. And thanks for the feedback.