ram-it

Completed install yesterday. The sound is awesome! Can't wait to go for a spin. Install pics have been posted in my sig. Problems were encountered though. Mainly, the Air tube flanges on the headers were rotated 90 degs from the flanges on the tubes. This required cutting the tubes, rotating them and welding back together. The air tube flange on the drivers side was also located on the #1 cylinder and not the #3 as on the factory manifold. This meant I needed to make a 4" extension to the drivers side tube or get another passenger side tube for the drivers side. Warhusker graciously gave me his passenger side tube for this and we had both flanges rotated. Hooked right up from there. Only other item was the I-pipe on the GMMG was too long and needed to be cut. Other than that we put it together.