spina74

iTrader: (12)

Ok, so i have a moser 9 in my car, and a friend of mine is selling me his stock length chrome moly d/s with 1350 u joints. I have a stock 1310 yoke and stock 3rd member. I want to put a 1330 yoke on the car right now since they are cheaper, until next season when I go all out on the 3rd member parts wise. What yoke will i need to not run into an issue a long or short yoke. The car is an M6 as well.

HoLLo

iTrader: (17)

If by stock length driveshaft you mean to connect an fbody trans to a 10 bolt then you will need the long yoke to cover that almost 1" slack.