View Full Version : New PB full weight m6


95civic2005
10-07-2011, 08:23 PM
I had 2 new personal bests last night. Prior to last night my best was 11.45. First pass I made was an 11.36, but I can't find the slip anywhere. Below are the other 2 passes I made.

60'-1.668 1.641
330-4.775 4.736
1/8-7.300 7.266
mph-97.33 97.66
1000-9.485 9.453
1/4-11.325 11.296
mph-125.26 122.61

The 11.296 run was my last run of the night and I even hit the rev limiter in 3rd, I'm assuming that's why my mph was lower. The car has trapped 124 prior to last night but normally traps 121-122.

I was excited to say the least. I think the car has a little more in it, but for a full weight stock cubed m6 I'm satisfied with it for now. 28in et drags and a 150 shot for next year! :D

big dave
10-08-2011, 05:20 AM
Wow, strong running car. Your setup is very similar to mine but I'm nowhere close to those times. What is your race weight? Is it still the stock bottom end? My guess is you have to be making somewhere around 460 rwhp.

nocooler
10-08-2011, 08:51 AM
Nice - my full weight m6 car runs about the same. Little quicker in the 60' but a little less mph.

BayAreaSS
10-08-2011, 01:31 PM
Good passes. Thats about the same as my car but I haven't ran in good weather yet. What was the da? and race weight?

SLP4CamaroSS
10-08-2011, 06:32 PM
What front tire you runing

Hardtop
10-09-2011, 09:32 AM
Nice times, congrats.

95civic2005
10-09-2011, 12:38 PM
Thanks guys for all the congrats and compliments! Sorry took so long to answer the questions but I ended up going to the LSX shootout in Indy yesterday. It was an awesome time!

I forgot to mention that the car does have the spare tire and jack removed along with the sway bar, but that's it.

Wow, strong running car. Your setup is very similar to mine but I'm nowhere close to those times. What is your race weight? Is it still the stock bottom end? My guess is you have to be making somewhere around 460 rwhp.

When I weighed the car it had 1/8 tank of gas and it was 3510 with me. I'm 160lbs. Bottom end does have forged pistons with 4cc dish and ARP rod bolts. The CR is about 10.0-10.1 to 1. The car previously dynoed 438 as its highest but also did 43x on another dyno.

Nice - my full weight m6 car runs about the same. Little quicker in the 60' but a little less mph.

Yeah I need to get my 60ft down to the 1.5s and I think it will make a lot quicker pass.

Good passes. Thats about the same as my car but I haven't ran in good weather yet. What was the da? and race weight?

DA was a little over 1100 and weight was 3510 last time I weighed it. Should be about the same.

What front tire you runing

Its just a radial from Tire Discounters. I think 165/80/15 Nexen or Nankang

94 s dime
10-22-2011, 07:21 AM
cars slow! haha jk glad your enjoying it

95civic2005
10-24-2011, 06:55 PM
Yeah it's slow. The guy who built it didn't know what the hell he was doing! LOL

Na man, I definitely happy with the car! Can't wait for next year with the 150 shot on it!