how much power are u making with only one ati side pin?
10-26-2011, 05:33 PM
#1
11 Second Club
Thread Starter
iTrader: (24)
Join Date: Aug 2009
Location: Amarillo, Tx
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
how much power are u making with only one ati side pin? I pinned my crank for my ATI dampner the side one that works with the ati dampner itself not the front pin but read a write up about someone breaking it off and messing up there crank snout. I'm shooting for 750 with my D1 setup.
10-26-2011, 11:34 PM
#2
One is not enough for that power IMO. I used two with a maxed out D1SC on a stock crank. Each pin dug a little rut into the damper keyway and it stayed that way until I tore it down 10k miles later. Crank and pins were fine but the ATI damper took the damage.
