Are my LS3's trashed?
#1
Are my LS3's trashed?
Finally got my ls3 headed 408 running and found out #5 was smoking badly. Come to find out, the intake port has a crack in it where the pushrod is. I have one person telling me it's fixable and another saying it's just way to thin and prolly can't be fixed because it's just too hard to get to. Just curious what the consensus is here on this problem.
#3
10 Second Club
iTrader: (4)
Finally got my ls3 headed 408 running and found out #5 was smoking badly. Come to find out, the intake port has a crack in it where the pushrod is. I have one person telling me it's fixable and another saying it's just way to thin and prolly can't be fixed because it's just too hard to get to. Just curious what the consensus is here on this problem.
Trending Topics
#11
TECH Resident
iTrader: (21)
Join Date: Feb 2005
Location: lakeland, fl
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
your goal is certainly attainable in my book with a hyd roller cam, good heads, decent compression and a free flowing intake setup.
lg motorsports hit 577rwhp with a stock bottom end ls3
ive been damn near 550 on stock bottom end with wcch work..nothing special
lg motorsports hit 577rwhp with a stock bottom end ls3
ive been damn near 550 on stock bottom end with wcch work..nothing special
#14
TECH Veteran
iTrader: (11)
IIRC Pwebbz build is a little more than a conventional pump gas WCCH or PRC LS3 headed build. His heads have extensive porting hence what just happened to create this thread. I think he went 9's all motor in the car with it.
His flow on his LS3's were something crazy like 380 cfm and they were still flowing at .750 and .800 lift.
Edit: Here is a thread I remember reading about the heads
https://ls1tech.com/forums/generatio...head-pics.html
His flow on his LS3's were something crazy like 380 cfm and they were still flowing at .750 and .800 lift.
Edit: Here is a thread I remember reading about the heads
https://ls1tech.com/forums/generatio...head-pics.html
Last edited by 87silverbullet; 11-06-2011 at 08:25 PM.