rollbar questions
#1
Teching In
Thread Starter
Join Date: Dec 2011
Location: Delaware
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
rollbar questions
I have an 00 vert, looking to install a rollbar soon. Question is, what would i have to put in to make it NHRA legal? Looking at the 4 pt wolfe weld in bar, just looks cleaner imo. Am I required to have a 6pt or anything addition with being a convertible? Planning on taking my car to the track eventually and dont want to screw myself over. Thanks.
#3
Teching In
Thread Starter
Join Date: Dec 2011
Location: Delaware
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
#4
TECH Fanatic
iTrader: (35)
all depends on how fast you want to go,,, Best advice I can give you is this,, buy the wolfe 6pt, I installed my weld in myself, and it fit fantastic, Pay the extra and get the notched ends, makes life so much easier. Get a 6pt. with removable door bars, that way you can put the door bars in when you run at the track, and leave them out on the street, this is the setup I have, and it works great for a street strip car.
Put up a few pics so you can get an idea of what I am talking about.
I have also heard of guys making the rear crossbar removable so you can carry passengers, I dont know if its legal though, I dont care for passengers in the rear of my car, thats why I took those seats out.
Hope this helps you figure which way to go..
Put up a few pics so you can get an idea of what I am talking about.
I have also heard of guys making the rear crossbar removable so you can carry passengers, I dont know if its legal though, I dont care for passengers in the rear of my car, thats why I took those seats out.
Hope this helps you figure which way to go..
#5
Teching In
Thread Starter
Join Date: Dec 2011
Location: Delaware
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
thanks man that helps alot. didnt realize you could get removable door bars thats just what im looking for. probably going in sometime in the few months or so