need help with some build ideas....
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
need help with some build ideas....
Ok, so the motor in my 05 CTS-V went out this week, and I am trying to decide what option to take as far as rebuilding. I drive the car probably half the time, so its not 100% DD car. I dont really race the car, but I love being able to drive the car, and decide to romp on it at any time. So I am wanting to go all motor, not juicing it at all. I'm not wanting to go completely crazy on the build. I just cant stand to spend the money on rebuilding it and leaving it exactly as is, I fell like I'm wasting it.
So what are some ideas for the motor on rebuild?
leave it the same bore, but forge the bottom end so its stronger?
Maybe stroke it out to a 402 or 408?
What are your thoughts? and what would it take to do that?
So what are some ideas for the motor on rebuild?
leave it the same bore, but forge the bottom end so its stronger?
Maybe stroke it out to a 402 or 408?
What are your thoughts? and what would it take to do that?
#2
TECH Fanatic
iTrader: (35)
Personally, If your gonna get in it, You might as well throw as many cubic inches that you can at it. Get good forged parts and have the piece of mind knowing that it will hold the power.. Hope you know when you build a good stout engine, there is alot more to follow it, Drivetrain, Suspension, ETC..
#3
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Personally, If your gonna get in it, You might as well throw as many cubic inches that you can at it. Get good forged parts and have the piece of mind knowing that it will hold the power.. Hope you know when you build a good stout engine, there is alot more to follow it, Drivetrain, Suspension, ETC..