LS1 Short on MAF/o2 Circuit
#1
LS1 Short on MAF/o2 Circuit
I have put an LS1 into my car and it keeps blowing a fuse on my fuse board. I have found out that it is the wire that used to go to:
connector C105 Pin2 (pink wire). (2000 LS1 Camaro)
I also have 2 error codes P0102 - MAF circuit low
and P0135 o2 Sensor Heater
Now I guess these are all linked into this 1 circuit so I think i must have a short to ground but how do I find it and is what I've said above correct?
Thanks a lot
Luke
connector C105 Pin2 (pink wire). (2000 LS1 Camaro)
I also have 2 error codes P0102 - MAF circuit low
and P0135 o2 Sensor Heater
Now I guess these are all linked into this 1 circuit so I think i must have a short to ground but how do I find it and is what I've said above correct?
Thanks a lot
Luke