What cam in a LQ9
#1
Teching In
Thread Starter
Join Date: Jul 2012
Location: Four Oaks, NC
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
What cam in a LQ9
Alright here we go. I'm new here as well as to the LS stuff, I am a diehard GM fan but have only delt with old school big/small block Chevy’s. I just recently dipped in to the new school LS stuff and I have a few question im sure yall can answer. I have a 67 chevy pickup short bed step side, I pulled a slightly built 350 with a 350 trans out and have so far stuffed a 2004 model LQ9 mated to a 4l80E with a 3600 Yank stall converter, between the frame rails. I have not ordered a wiring harness yet or ECM. The LQ9 is bone stock other than the hustler long tube headers and gm hotrod oil pan, While I have the front clip off I would like to do a few more things to the motor but im getting no were fast. Is there a hard hitting cam I can use that will work with my stock intake and what is the best way to go as far as throttle linkage, drive by wire or change the throttle body and do drive by cable. Sorry for the long post. Any info or ideas would be great