what cam w / blower
#1
Staging Lane
Thread Starter
Join Date: Jan 2011
Location: virginia
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
what cam w / blower
any suggestions greatly appreciated, stock ls1 with procharger, looking for a nice street cam to run with this blower. 448rwhp currently.
#2
LS1Tech Sponsor
iTrader: (16)
http://shop.brutespeed.com/Brute-Spe...d-Camshaft.htm
Check out my blower cam, many people on here use it. Bob
Check out my blower cam, many people on here use it. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#3
TECH Addict
iTrader: (4)
Join Date: Feb 2009
Location: Savannah, GA
Posts: 1,998
Likes: 0
Received 0 Likes
on
0 Posts
What supporting mods do you have? We finished my friends build, we did a ported ls6 pump, new chain and gears, since we did a custom blower cam. Call comp or futral, they can make u a custom grind depending on your goals.
I HIGHLY suggest, dual valve springs, along with at least 42 lb injectors, hardened push rods, and checking those rockers....
He made 540 rw and 473tq on 88% duty cycle on 15 degrees timing.. on a dyno jet.
I HIGHLY suggest, dual valve springs, along with at least 42 lb injectors, hardened push rods, and checking those rockers....
He made 540 rw and 473tq on 88% duty cycle on 15 degrees timing.. on a dyno jet.