heater hose cheapskate mod with pics!!
#3
Remove the isolators over the rear springs and replace with 1/2" heater hose, does a nice job lowering it:
https://ls1tech.com/forums/suspensio...d-writeup.html
https://ls1tech.com/forums/suspensio...d-writeup.html
Last edited by jt76; 10-16-2012 at 02:55 PM.
#8
TECH Veteran
iTrader: (4)
looks good! It definitely makes a nice difference. I just had to re-do this last night myself, swapped out the BMR's in the back for sportlines. just gotta finish up the caliper paint job so I can get the car on the ground to see how much it dropped. One of these days I'd like to step up to a better setup like you've got
#13
What rear end do you have on your ta? I have a moser 12 bolt with stock blistins and was wondering if this would help lower the rear to stock height instead of a 4x4 look? The springs are stock too.
#14
TECH Junkie
Join Date: Oct 2009
Location: Rutherford, North Carolina
Posts: 3,552
Likes: 0
Received 1 Like
on
1 Post
After having the Eibach Pro-Kit on my car, I'm wanting to swap them out with something different. I can't stand how they ride anymore.
Car looks a lot better OP. Looks even now if that makes any sense.
Car looks a lot better OP. Looks even now if that makes any sense.