Siemens 3172 57# injectors...
#1
Siemens 3172 57# injectors...
I've searched high and low for some info on these guys
I have these injectors left over from a previous big turbo project where the programming was done with Milliseconds.
I'm now operating with this HP Tuners craziness, and with all of the reading that I've done, I do not want to do this half assed.
This is so far the most data I have found on these things, and to say its crude would be a massive understatement
http://www.myo-p.com/Discusion%20-%2...est_2-3-08.pdf
Is there any chance someone has actual flow data and injector offset voltage on these injectors at 58psi, for various injector open times?
I'd love to build myself a flow bench, rig up a computer and get actual data on the exact injectors I will be using, but, well... I'm gonna be VERY busy over the next 5 months, and need to get these up and running sooner than later.
I have these injectors left over from a previous big turbo project where the programming was done with Milliseconds.
I'm now operating with this HP Tuners craziness, and with all of the reading that I've done, I do not want to do this half assed.
This is so far the most data I have found on these things, and to say its crude would be a massive understatement
http://www.myo-p.com/Discusion%20-%2...est_2-3-08.pdf
Is there any chance someone has actual flow data and injector offset voltage on these injectors at 58psi, for various injector open times?
I'd love to build myself a flow bench, rig up a computer and get actual data on the exact injectors I will be using, but, well... I'm gonna be VERY busy over the next 5 months, and need to get these up and running sooner than later.