WTB: 10 Bolt Rear End. (M6 Car)
#1
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Apr 2011
Location: South Chicago
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
WTB: 10 Bolt Rear End. (M6 Car)
I am looking for a 4 channel 10 bolt rear end (TCS and ABS).
I am looking for one with lower mileage and absolute no issues.
(Stock Torsen Posi is good, Axles not bent, Bearings are good)
It is going into a M6 car.
I am out of Chicago and will drive if close, However I will pay for shipping no problem if the rear end meets the requirements along with price.
Thanks.
Andy
I am looking for one with lower mileage and absolute no issues.
(Stock Torsen Posi is good, Axles not bent, Bearings are good)
It is going into a M6 car.
I am out of Chicago and will drive if close, However I will pay for shipping no problem if the rear end meets the requirements along with price.
Thanks.
Andy
#2
11 Second Club
iTrader: (8)
Join Date: Jan 2002
Location: SILSBEE TX
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
ps, I do have a complete 10 bolt from a 2000 camaro
complete all new bearing/Detroit Locker/3.73/AMA cover with stud kit/mos axles with reluctor rings/4 channel /backing plates,no rotors/welded tubes/weld on relocate brackets for lower control arm
500 + shipping or pick up.
unit housing has 74 k miles, 3 k miles on complete rebuild -locker, gear, bearings,axles
Pulled to add 9"
Johnny
PM /
EMAIL SSSLP2@SBCGLOBAL.COM/
CALL 409 3855381
complete all new bearing/Detroit Locker/3.73/AMA cover with stud kit/mos axles with reluctor rings/4 channel /backing plates,no rotors/welded tubes/weld on relocate brackets for lower control arm
500 + shipping or pick up.
unit housing has 74 k miles, 3 k miles on complete rebuild -locker, gear, bearings,axles
Pulled to add 9"
Johnny
PM /
EMAIL SSSLP2@SBCGLOBAL.COM/
CALL 409 3855381
#3
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Apr 2011
Location: South Chicago
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
ps, I do have a complete 10 bolt from a 2000 camaro
complete all new bearing/Detroit Locker/3.73/AMA cover with stud kit/mos axles with reluctor rings/4 channel /backing plates,no rotors/welded tubes/weld on relocate brackets for lower control arm
500 + shipping or pick up.
unit housing has 74 k miles, 3 k miles on complete rebuild -locker, gear, bearings,axles
Pulled to add 9"
Johnny
PM /
EMAIL SSSLP2@SBCGLOBAL.COM/
CALL 409 3855381
complete all new bearing/Detroit Locker/3.73/AMA cover with stud kit/mos axles with reluctor rings/4 channel /backing plates,no rotors/welded tubes/weld on relocate brackets for lower control arm
500 + shipping or pick up.
unit housing has 74 k miles, 3 k miles on complete rebuild -locker, gear, bearings,axles
Pulled to add 9"
Johnny
PM /
EMAIL SSSLP2@SBCGLOBAL.COM/
CALL 409 3855381
Out of curiousity where are you located?
Other issue is that I've got the T56 and the car is street driven quite often so the Detroit locker would be a lil excessive lol.
Thanks though man.
#4
11 Second Club
iTrader: (8)
Join Date: Jan 2002
Location: SILSBEE TX
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
100 miles east of Houston,tx
I run A4 and hace no problems, I like the lockers, strip OR street,it has been 45 years sence I drove a locker with std, most ppl say you may not like it with the STD
good luck.Johnny
I run A4 and hace no problems, I like the lockers, strip OR street,it has been 45 years sence I drove a locker with std, most ppl say you may not like it with the STD
good luck.Johnny
#5
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Apr 2011
Location: South Chicago
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Johnny. Good luck with the sell but I doubt you'll have much trouble moving it. Good price.