WTB Aluminum LS block for mock up
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Nov 2010
Location: Mooresville, Indiana
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
WTB Aluminum LS block for mock up
Looking for an aluminum LS block to be used for mock up. For cost reasons I would prefer one that has been grenaded and can't be repaired.
Tom
317 502 7460
Tom
317 502 7460
#4
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Nov 2010
Location: Mooresville, Indiana
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Well Jim... Nothing too exciting. My wife was driving the 66 to an event in Northern Ohio and hit a semi-truck driveshaft. Destroyed a lot of parts to include putting a fairly serious gouge in our original frame. So, long story short, I had another frame (from a parts car) and we're doing the ABC Performance mini-tub kit on the rear and possibly a different coilover mount on the front. Also switching from the Mast pan to an F-body pan with the Improved Racing baffle kit installed which will require some front crossmember slicing and dicing. Oh yeah, the L92 sustained some damage so we bought a Mast 416 long block...