4 channel to 3 channel questions
#1
4 channel to 3 channel questions
I sold my 9" and am trying to just stick a rear under it to get it driveable, found a 10 bolt with an Eaton HD and 3.73s for a song, but its 4 channel and mine is 3 channel.
Since I dont have a drill press I cant drill the 13/16 hole in the top of the center section.
Can I just extend my 3 channel plug wires and plug it into one of the wheel sensors? It is 2 wire on both the 3 and 4 channel rear. Im going to try it anyways probably....
Since I dont have a drill press I cant drill the 13/16 hole in the top of the center section.
Can I just extend my 3 channel plug wires and plug it into one of the wheel sensors? It is 2 wire on both the 3 and 4 channel rear. Im going to try it anyways probably....
#3
LS1Tech Sponsor
iTrader: (16)
The easiest thing to do is to install the rear and leave the abs/tcs alone, which will mean that none of it will work. You'll have that light staring at you on the dash, and you'll have old school non abs brakes. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website