cam swap parts list so far, what else
03-27-2013, 07:04 PM
#1
On The Tree
Thread Starter
Join Date: Jun 2012
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
cam swap parts list so far, what else Hey guys i waed to do a HCI build but a cam swap is were ill start first for money reasons. Here is what i got so far for my 1996 trans am a4
1.1.6 rr's
2.valve springs
3.lifters
4.push rods.
5.timing chains, are stock sets okay?
6. Obviously the cam shaft havnt made my mind up yet on which. Was either think a cc306 or a custom grind, not sure yet tho.
I have some supporting mods already such as the rockers, ewp, yank 3600, 4.10's, LT'S, ORY pipe, and a bullet muffler.
Anything im missing or sshould get please let me know guys, and would a pcmforless be a good choice to have my computer sent untill i have money for a dyno session? Thanks again guys!!
1.1.6 rr's
2.valve springs
3.lifters
4.push rods.
5.timing chains, are stock sets okay?
6. Obviously the cam shaft havnt made my mind up yet on which. Was either think a cc306 or a custom grind, not sure yet tho.
I have some supporting mods already such as the rockers, ewp, yank 3600, 4.10's, LT'S, ORY pipe, and a bullet muffler.
Anything im missing or sshould get please let me know guys, and would a pcmforless be a good choice to have my computer sent untill i have money for a dyno session? Thanks again guys!!
03-28-2013, 03:59 PM
#4
On The Tree
Thread Starter
Join Date: Jun 2012
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
my goal for just a cam only setup would be low 12's, and power wise what ever gets me to my goal of low 12's. Has anyone gone 11's with a cam only lt1. Also have some BMR stuff on the way, should be here 2moro.
