BigDaddy0381

iTrader: (7)

what plugs and plug wires would be best for this thing? i'm running TR55 (.045 gap) and stock wires now. any info would be great, here is my setup

Lq4 (iron) block punched out.030 with Flat tops pistons no reliefs
Lq4 stock rods
317 heads milled .010 & valve job
decked milled .018
.040 gaskets
223/231 .610"/.617" 110+2 cam
Brian tooly double springs and tooled hardware.
LS2 Chain
GM LS Rocker Arms
BTR SLD lifters
LS2 Trays
head studs
BTR 7.373" Pushrods (length can be changed)
flex fuel injectors
circle D 3000 stall
4L80E
4.88 gears

2000PewterT/A

Tr55 or a TR6 would work great with any good name brand plug wires. I am running MSD's and I am very happy with them.

M4N14C

iTrader: (3)

Same. Running TR55IX's and MSD wires, no complaints

Run TR6's if you plan on using the bottle.

Z28SLPCAMAROZ28

TR55IX's with MSD wires here as well...