Monster level 3 install
09-03-2013, 08:17 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Location: greenville sc
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Monster level 3 install I finished installing my clutch yesterday and let me tell you this clutch drives fantastic! Clutch pedal is a little stiffer but besides that its great and very easey to drive. I recommend this clutch for anybody. I do daily drive my car. I only have about 30 miles on it so far. No chadder at all. Oh and my wife jumped in and drove it without a problem. Great product!
09-03-2013, 09:33 AM
#2
Teching In
Thread Starter
iTrader: (1)
Join Date: Apr 2012
Location: greenville sc
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Also for anyone wanting to do the drill mod you don't have to remove the master cylinder to remove the roll pin to get clutch line off. All I did is took a small screw drive and ground the tip off and put about a 15-20 degree bend in it. Stuck the handle into a socket with an extension and tapped it out with a hammer.
