Parts needed
03-10-2003, 01:50 AM
#1
Launching!
Thread Starter
Join Date: Feb 2003
Location: Fresno,CA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Parts needed I am swaping out the cam in my truck and i had a question for you guys. Will the stock timming chain and pushrods be ok to run a cam with 214/218 dur .540/550 lift 114 lobe sep. And i have 01 zo6 valve springs from the last cam. Will those also be fine for this cam.
