Brian Coles

So somehow spit a plug out the passanger side head. Ok could be all the plug changes reading plugs after spraying but it happened I pulled it to do the thread repair and no cash for new heads but wanted to know any cheap mods I should do while torn apart?

VandykeT/A

Port them yourself and replace your lifters.

Burken01

iTrader: (88)

Other than self porting the heads there's nothing I can think of that will be a huge benefit..

I would fix the thread and pop them back on

And get back on the road lol

Brian Coles

I removed air and egr so what vacum ports can I plug on intake now I can get to back of it? Thinking bypass TB while I'm at it.

ramairetransam

iTrader: (18)

do lifters while your there .

99Bluz28

iTrader: (35)

I'd replace the lifter trays, and carefully look over the lifters for any possible damage or excessive wear. If they look good then soak them in some Chemtool B12 for a few hours.

NolaTA

iTrader: (4)

Take the other head off and replace the gaskets with a thinner cometic to bump the compression up a bit, and get the heads ported.