LittleJohnson

iTrader: (1)

I have a victor Jr EFI, fuel rails and 4150 TB laying around from a previous build... Well now I'm starting a turbo build on a new car and I will be using e85 and shooting for around 1000rwhp on a H/C/I forged 370" LQ4 with probably a PT88. I have most of the fuel system mapped out, the only part I'm not certain of is the fuel rails that come with the Victor Jr. I cant seem to find any real world results of big power and just want to know if i need to pick up better rails while i'm collecting parts.

Thanks in advance.

Blown06

iTrader: (32)

I assume you'll be using a belt drive pump to make this "1000 rwhp on e85" right?

I don't know what they will hold, but I just had a pro-mod style rail done for my super vic. I was feeding the edelbrock rails with a -12 y'd to a -10 feeding each rail and I'm having some pump volume issues with 2 magnafuel 4303's. I'm guessing I'm near 1400-1500 hp on gas.

If you like to get some rails like I just got, I'll see if I can post some pics and get you the details. It's a $500 upgrade.

LittleJohnson

iTrader: (1)

I do plan to use a weldon belt drive pump. But if you were able to go over the 1000hp mark with the edelbrock rails I shouldn't have a problem I dont plan to make any more than 1000 to the tires.

Blown06

iTrader: (32)

Well I was on gas.........and I'm having some fueling issues (don't know the exact cause yet) where it will not build more than 60 psi of fuel pressure even with 2 4303's going.

On e85 you will need more fuel system.

Here are some pics of the new rails I had installed. Like I said, I can get this done for $500 if you or anyone else is interested.