HP numbers on my setup
02-10-2014, 09:45 AM
#1
On The Tree
Thread Starter
Join Date: Jan 2013
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
HP numbers on my setup 2004 5.3/4l60e swap in an 89 mustang.
specs: 54-460-11 comp cam (235/243 @ .050", 0.621/0.624, 113*)
ported 706 heads, MLS gasket with .051" thickness, 2010 camaro manifolds, 7.400 chromoly pushrods, PRC dual springs and custom tune. stock 4l60e with corvette servo. 2.73 trac-loc rear.
what do you think my HP outcome would be with this setup.
specs: 54-460-11 comp cam (235/243 @ .050", 0.621/0.624, 113*)
ported 706 heads, MLS gasket with .051" thickness, 2010 camaro manifolds, 7.400 chromoly pushrods, PRC dual springs and custom tune. stock 4l60e with corvette servo. 2.73 trac-loc rear.
what do you think my HP outcome would be with this setup.
02-13-2014, 10:39 AM
#4
not sure HP-wise, maybe a peak of 450 at the crank with no accessories and all of that power at the top of the curve... but you're going to want quite a bit of stall (4,000+) and more gear to be happy with that much cam in a 5.3. torque is going to suffer. Not going to be much fun on the street IMHO.
02-13-2014, 11:41 AM
#5
On The Tree
Thread Starter
Join Date: Jan 2013
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
not sure HP-wise, maybe a peak of 450 at the crank with no accessories and all of that power at the top of the curve... but you're going to want quite a bit of stall (4,000+) and more gear to be happy with that much cam in a 5.3. torque is going to suffer. Not going to be much fun on the street IMHO.