Ideas for 2008 6.0/6L80 2500 chassis
#1
Ideas for 2008 6.0/6L80 2500 chassis
Looks like I'm picking up a rolling 2008 two wheel drive extended cab long box
roller with a 6.0 and 6L80E and a pile of not so great sheetmetal,interior,harnesses,electronics,etc possibly from more than one truck.Options I'm mulling over are:
-rebuild it into a 2008 truck(If it was a 4x4,this would be the logical choice,
2WD trucks are hard to even give away around here)
-sell the engine/trans/etc to a friend and install it in his 442 and sell off the rest of the parts,or just sell it all off
-use the drivetrain in one of my vehicles
-shorten/rework the frame and put a sixties truck body on it
Any suggestions other than forget about it and give it away to another deserving forum member?
roller with a 6.0 and 6L80E and a pile of not so great sheetmetal,interior,harnesses,electronics,etc possibly from more than one truck.Options I'm mulling over are:
-rebuild it into a 2008 truck(If it was a 4x4,this would be the logical choice,
2WD trucks are hard to even give away around here)
-sell the engine/trans/etc to a friend and install it in his 442 and sell off the rest of the parts,or just sell it all off
-use the drivetrain in one of my vehicles
-shorten/rework the frame and put a sixties truck body on it
Any suggestions other than forget about it and give it away to another deserving forum member?
#2
TECH Resident
Didn't know there was a truck 6.0/6 speed combo. That sounds like a cruiser hot rod build to me. I'm thinking like a 50 Merc or something along those lines. Something you can drive to the beach or whatever. Enough HP to be cool, but like 25 mpg too.