The safest kit?
#1
The safest kit?
I would like for some of you that has tried a few kits to list a complete safe kit for 150 shot on an M6.
Could someone take a minute and list the parts needed to make a kit that is pretty safe for a 150 shot when needed. The goal is to make it as safe as it can be. For as cheap as can be. I asked this question before as I was wonderring if it could be done for less than $1000.00.
Thanks,
Could someone take a minute and list the parts needed to make a kit that is pretty safe for a 150 shot when needed. The goal is to make it as safe as it can be. For as cheap as can be. I asked this question before as I was wonderring if it could be done for less than $1000.00.
Thanks,
#2
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: The safest kit?
Under a 1k, should be, try this:
-NX (or n.e. prefered makers) wet kit
-FPSS
-blow down tube and pressure fitting
Install and have fun. You have an M6, soem people say M6's dont need a window switch, cause you let off the throttle during shifts, but I would opt for one in case of a miss or added safety(besides only $100 for that peace of mind). Good-luck.
-NX (or n.e. prefered makers) wet kit
-FPSS
-blow down tube and pressure fitting
Install and have fun. You have an M6, soem people say M6's dont need a window switch, cause you let off the throttle during shifts, but I would opt for one in case of a miss or added safety(besides only $100 for that peace of mind). Good-luck.