My 1995 rear mount build
#1
Teching In
Thread Starter
Join Date: Feb 2014
Location: Edmonton,alberta
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
My 1995 rear mount build
So I thought id post some pictures and stuff of the build I did last summer.
The car started as a 1995 Camaro V6 and was bought just to do this, the motor soon came out and I went with the BMR k member and tranny member to use the th350, I used a old school 4bolt main block and built it into a 383 put it in the car with 150hp shot of nos and drove the crap out of it. That only lasted half the summer because I was sick of filling the bottle 2-3 times a week,this car with slicks ran a 11.5 at 119mph with a 1.6 60ft that is until the axel broke.
I then got a idea to build it into a rear mount turbo car, I used a 68mm turbonetics and a quick fuel blow thru carb, I did all the work my self and here is what I came up with.
The car ran a 11.5 at 120mph with a 1.8 60ft and this was at 10lbs of boost
Now how do I post pics?
The car started as a 1995 Camaro V6 and was bought just to do this, the motor soon came out and I went with the BMR k member and tranny member to use the th350, I used a old school 4bolt main block and built it into a 383 put it in the car with 150hp shot of nos and drove the crap out of it. That only lasted half the summer because I was sick of filling the bottle 2-3 times a week,this car with slicks ran a 11.5 at 119mph with a 1.6 60ft that is until the axel broke.
I then got a idea to build it into a rear mount turbo car, I used a 68mm turbonetics and a quick fuel blow thru carb, I did all the work my self and here is what I came up with.
The car ran a 11.5 at 120mph with a 1.8 60ft and this was at 10lbs of boost
Now how do I post pics?
Last edited by turboguy1982; 02-21-2014 at 06:49 PM.