orthopod

iTrader: (1)

I have an '02 WS6 that I am preparing for auto-x/HDPE track events. I would like to delete the factory PS cooler and add an aftermarket. It seems like Permacool 1004 (tube and fin frame mount) is used and B&M 70265 (Plate style) is also used. Any experiences and/or recommendations?

http://www.summitracing.com/parts/bmm-70265/overview/

http://www.summitracing.com/parts/prm-1004/overview/

79_T/A

iTrader: (1)

I use the plate style B&M. They are more effective than the tube & fin. No more cooking fluid with the factory cooler.

orthopod

iTrader: (1)

Which size plate style did you get? Where do you have it mounted? Picture? Thanks!

demonspeed

iTrader: (7)

I'll move this to the General Maintenance section as we've had a bunch of conversation on this over there

eseibel67

iTrader: (10)

This one is good:

http://www.summitracing.com/int/part...1009/overview/

dailydriver

Same here, stacked plate IS the way to go!

Mine is mounted right behind the driver's side fog light opening (Z/28).

wssix99

iTrader: (5)

Here's my thread on the rail cooler. https://ls1tech.com/forums/general-m...g-success.html