Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Nitrous Outlet / NX 78mm plate jetting questions

Thread Tools
 
Search this Thread
 
Old 05-20-2014, 01:03 PM
  #1  
9 Second Club
Thread Starter
 
ZackMorris's Avatar
 
Join Date: Apr 2012
Location: Orlando, FL
Posts: 126
Likes: 0
Received 1 Like on 1 Post
Default Nitrous Outlet / NX 78mm plate jetting questions



Why does the nitrous jetting change so much from 150->175hp? It moves in clean .005 increments for each 25rwhp until 150.. Then it requires .011 for 25hp.


Why does a NX plate have a lower nitrous jetting to yield the same rwhp?


For example:

NO 200 rwhp 78/44
NX 200 rwhp 73/39


NO 225 rwhp 82/46
NX 250 rwhp 82/42


Is the nitrous outlet plate not as efficient, therefore wasting nitrous to yield the same HP as a NX plate? (The fuel jetting are irrelevant, as those are tuned to specific needs) An 82 jet should flow around 258 rwhp based on all of the formulas. Anyone have ideas?
Old 05-20-2014, 01:08 PM
  #2  
TECH Veteran
iTrader: (11)
 
87silverbullet's Avatar
 
Join Date: Mar 2007
Location: Slidell,LA
Posts: 4,873
Likes: 0
Received 8 Likes on 7 Posts

Default

All of those charts are just a suggestion. They all get you in the ballpark of the hp rating. If you know how to tune using the jets you aren't going to go by the chart anyways.



Quick Reply: Nitrous Outlet / NX 78mm plate jetting questions



All times are GMT -5. The time now is 07:09 PM.