New 255 TFS LS3 heads milled 62cc, 235/240 Cam
05-22-2014, 10:33 PM
#1
New 255 TFS LS3 heads milled 62cc, 235/240 Cam Category: Engine - Intake/Fuel
Price: $2350
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): MN
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
235/240 .646/.608 112lsa Comp Cam Used, but in good shape. $175 shipped
05-23-2014, 09:54 AM
#3
I ran 3 cams in my old 347 with ported 806 heads, and this cam made the most power out of them. The other two being a VRX5 236/238 .601/.605 113, and a RapTR 236/242 .615/.615 111. It ran great, it is aggressive with the LSK lobes, but it makes power! Moving on to a custom cam I came up with for my turbo 333".
I haven't ran the heads at all, but they look and flow great. I flowed them at work and they went 388 cfm at .700". I milled them, and then changed my mind on the shortblock, and the chambers are too small for my setup. That is the only reason I'm selling them. I plan on getting the same heads again just unmilled, if they don't sell I will just keep these and run it high compression!
I haven't ran the heads at all, but they look and flow great. I flowed them at work and they went 388 cfm at .700". I milled them, and then changed my mind on the shortblock, and the chambers are too small for my setup. That is the only reason I'm selling them. I plan on getting the same heads again just unmilled, if they don't sell I will just keep these and run it high compression!