NIB PRC 285 Heads
#1
Launching!
Thread Starter
NIB PRC 285 Heads
Category: Accessories
Price: $2700
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V
Location (State): TX
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
The heads have every option, .650 springs, Titanium Intake valve and Stainless steel exhaust valve.
They have never been run or even bolted onto the block yet. $2700, paid $3200.
Looking to sell due to possibly going a different direction with build.
#3
Launching!
Thread Starter
Edit, Frankenstein Racing called and said they are starting on my heads today which are currently at Frankenstein Racing getting some touch up's before I ran them. Depending upon what he does the price is subject change depending upon his work. FYI
He was scheduled to hand port the intake and bowl area and replace the Springs with .700 BTR/PAC springs and Ti retainers and locks. I know the spring kit was add $300, not sure how much the extra work will cost.
Edit #2, just spoke with Chris (Frankenstein Racing) and he expects about $1500 in additional work on these heads including the springs.
He expects the heads to flow 410-415 on the intake and 260 on the exhaust (TSP/PRC's numbers are not accurate, heads flowed 380 and 242 out of the box and stalled above .625.
He was scheduled to hand port the intake and bowl area and replace the Springs with .700 BTR/PAC springs and Ti retainers and locks. I know the spring kit was add $300, not sure how much the extra work will cost.
Edit #2, just spoke with Chris (Frankenstein Racing) and he expects about $1500 in additional work on these heads including the springs.
He expects the heads to flow 410-415 on the intake and 260 on the exhaust (TSP/PRC's numbers are not accurate, heads flowed 380 and 242 out of the box and stalled above .625.
Last edited by Millenium Z06; 06-30-2014 at 12:04 PM.