MIG74

Almost in the 10's. Can't wait to get it sorted.

HCI2000SS

iTrader: (2)

Not bad! What's the race weight?

MIG74

3650 with me in it. Hardtop M6. No backseat and burkhart front bumper brace. I also take the jack and spare out of course but that's it.

BODUKE

Good runs! What are your mods.

MIG74

Mods are in sig. This is with the progressive putting down 45% of the hit off the line and the ramp a 1.1 seconds (no delay). I have no traction in 1st gear or second, even with the 26" ET drags set at 12lbs.,so I know there's a 10 second time slip in there. Any advice to eliminate the wheel spin would be appreciated. Btw no front swaybar, stock rear swaybar, welded subframe connectors, non adj BMR lowers with relo bkts on lowest hole, tunnel mounted UMI torque arm set at 2degrees, stock front struts and summit rear shocks set in the middle. Is it time for 28's or should try some Viking coilovers and BMR rear swaybar? there's gotta a bunch of guys with 26" ET drags in the 10's right?!?!

MIG74

MIG74