I need some quick cam help....
03-14-2003, 10:46 PM
#1
Staging Lane
Thread Starter
Join Date: Mar 2003
Location: Cleveland, Ohio
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I need some quick cam help.... I having my heads done-up (there @ the shop now
I have a 98 Vette A4
This is what I and the Engine shop have decided....but i'm always still wondering if its the right move...
Comp Cam: 222/224 dur. 556/568 lift 112LS
Heads: milled .0025 ported polished intake valve stock size
exhaust valve 1.57 titanium ret. springs,etc
LS6 intake
TPIS LT headers
already have the basic bolt on BS.. Question is what do you guys think of this cam set-up? to hard on a A4 or just right. Should i go with more cam? Car needs to be reliable and pass emissions...lol <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Any input on this will help greatly....
Thanks
Brian
I have a 98 Vette A4
This is what I and the Engine shop have decided....but i'm always still wondering if its the right move...
Comp Cam: 222/224 dur. 556/568 lift 112LS
Heads: milled .0025 ported polished intake valve stock size
exhaust valve 1.57 titanium ret. springs,etc
LS6 intake
TPIS LT headers
already have the basic bolt on BS.. Question is what do you guys think of this cam set-up? to hard on a A4 or just right. Should i go with more cam? Car needs to be reliable and pass emissions...lol <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Any input on this will help greatly....
Thanks
Brian
03-14-2003, 11:27 PM
#3
Staging Lane
Thread Starter
Join Date: Mar 2003
Location: Cleveland, Ohio
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need some quick cam help.... I figured that cam will work,,,,,but
at this point of the game i can put in any cam.
just trying to get some input on what people are putting in. I want to make big #'s and still be reliable... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
After reading all these other posts,,,i see alot of people getting good #'s with stock LS1 heads
(to late for me now)but not to late for the cam...
Brian
at this point of the game i can put in any cam.
just trying to get some input on what people are putting in. I want to make big #'s and still be reliable... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
After reading all these other posts,,,i see alot of people getting good #'s with stock LS1 heads
(to late for me now)but not to late for the cam...
Brian