ls6 ported heads..help please??
#1
ls6 ported heads..help please??
hey i have a chance to buy a set of complete ls6 heads off and 01 z06 and they have 7,000 miles on them and i am woundering if it would be a good idea to buy them and have them ported and if so how much or should i save up and just buy another head like patriot or somthing else?? he wants $650 for the ls6 heads that are complete..and then what cam should i go with when i get them done..thanks for any help you can give me.
Jared
Jared
#3
thats a pretty good deal. I paid $750 for some Bare LS6 heads with a stage 1 porting. I would expect someone to charge about $1,500-2,500 for stage 2 porting, dual springs, retainers ect.
Cant go wrong with Race-Prep, FMS, TEA or A.S porting them!
Cant go wrong with Race-Prep, FMS, TEA or A.S porting them!
#4
TECH Fanatic
iTrader: (5)
Join Date: Apr 2004
Location: San Diego
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
$650 bucks?? Na, I'd say pass on those.... What did you say your friends phone number was again. Good buy I think. On the Cam question, it TOTALLY depends on what you want to do w/ the car. If you do the head/cam swap, don't forget to budget in another $5-600 for a good tune. Everybody seems to like the TR224 cam for a street car. Those heads, plus the 224 should be good for quite a bit of HP w/ very little (if any) loss in drivability.
Last edited by CaptUSA; 07-08-2004 at 05:26 AM. Reason: Missed a point
#6
TECH Veteran
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
WARNING: make sure they are NOT cleaned up. They should contain carbon buildup that is normal with a used set of heads.
You do not want cleaned=up heads since you cannot tell if they were damaged (cracked, etc.) and repared.....most professional head porters like Lingenfelter will not touch used heads that have been cleaned up for this reason.
You do not want cleaned=up heads since you cannot tell if they were damaged (cracked, etc.) and repared.....most professional head porters like Lingenfelter will not touch used heads that have been cleaned up for this reason.