Head Gasket ?
07-16-2004, 03:21 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2003
Location: lewisburg tn
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Head Gasket ? I Have A Tsp 231/237 And A Stock Bottom End . Can I Run A Set Of Heads That Have Been Milled .030 If I Run A .030 Thick Cometic Head Gasket Thanks For The Info
, adding a gasket with a compressed height of .030 will definately make you have clearance issues.
07-16-2004, 04:06 PM
#3
TECH Senior Member
.030 on LS1's would get you around 62cc.
With a 231/237 you better check PV but IMO you'll need to flycut pistons.
You might have a shot with MLS, better ask TSP.
With a 231/237 you better check PV but IMO you'll need to flycut pistons.
You might have a shot with MLS, better ask TSP.