Dyno results
#1
TECH Fanatic
Thread Starter
Join Date: Oct 2002
Location: Seattle,Wa.
Posts: 1,068
Likes: 0
Received 0 Likes
on
0 Posts
Dyno results
I picked up 18 RWHP after the ASP underdrive pulley and Mac mid length headers were installed. I was a little dissapointed. It did however change my torque curve bigtime.My dyno run without the pulley and headers netted me 212 ft.pounds of torque @ 2500 RPMs, with the pulley and headers the torque was 271 ft. pounds @ 2500 RPMs. At 3000 RPMs my torque was 197 ft. pounds without the pulley and headers and it was 309 ft. pounds of torque with the pulley and headers.
I don't know what to expect when I go to the track. I didn't get the HP I wanted ,however the torque curve went ape ****. If anyone has insight on the changes that took place please elaborate.
I think it's fair to say I picked up about 12 RWHP with the Mac mid length headers.
Thanks for listening.
I don't know what to expect when I go to the track. I didn't get the HP I wanted ,however the torque curve went ape ****. If anyone has insight on the changes that took place please elaborate.
I think it's fair to say I picked up about 12 RWHP with the Mac mid length headers.
Thanks for listening.
#2
TECH Resident
iTrader: (2)
Join Date: Dec 2001
Location: CT
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
I dont know that much about autos but was the converter locked during the first dyno or no? I think they just dynoed it a different way (locked as apposed to unlocked) this time making the TQ curve different.