Spring Break Shootout results!
#1
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Spring Break Shootout results!
First off, I want to thank Tony and MTI for putting on an excellent race! Great job guys. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
The best I was able to get out of the car was a 11.19@123.08 on a 1.61 60'. The track prep was not as good as it could have been, but that was due to the constant rain that morning. The crew did a good job getting it back race-ready. All in all, I was very happy considering the weather conditions and spinning through the 60'. With the normal 1.50 60', 10.9-11.0 would have been possible.
Everything was going well until the 2nd pass. I launched hard and the car went no where. I thought the clutch slipped, but I gave it some gas and it started to miss real bad/sputter. I pull around to the pits and let it idle for awhile. All seemed OK, but it still wasn't running well. I decided to put some gas in the car (I had 1/8 tank) and this seemed to help. I'm thinking I must have got some trash in the gas I had, but that is all speculation. There was quite a bit of junk in the race gas I put in Friday night, so my filter very well could have got clogged up some. I proceeded to run the 11.19 after this, so all is well. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I'm swapping out the fuel pump, fuel filter, and getting the injectors cleaned this week just to be sure.
I ran the 11.0 index and was ousted in the 2nd round because I slept at the light. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
http://www.minivette.com/SBSO/pages/DSCF0110.htm lol
I had a few people ask me if I was able to get the solid roller motor back in for the event. However, it wasn't to be since GTP still has the LS6 heads. <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> I was running a rebuilt 346ci (stock pistons/rods), GTP heads, TR230/224 hydraulic cam,etc... this weekend.
I'll have some pics and videos up soon!
It was fun putting some names with some faces. I was able to meet Camaroholic, Jason 98 TA, -Joseph-, BADZ, GS WS6 (MattG), Bad Habit Bird, Terry Burger, and a few others.
I can't wait for next year! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
<small>[ April 08, 2003, 03:02 AM: Message edited by: Jason99T/A ]</small>
The best I was able to get out of the car was a 11.19@123.08 on a 1.61 60'. The track prep was not as good as it could have been, but that was due to the constant rain that morning. The crew did a good job getting it back race-ready. All in all, I was very happy considering the weather conditions and spinning through the 60'. With the normal 1.50 60', 10.9-11.0 would have been possible.
Everything was going well until the 2nd pass. I launched hard and the car went no where. I thought the clutch slipped, but I gave it some gas and it started to miss real bad/sputter. I pull around to the pits and let it idle for awhile. All seemed OK, but it still wasn't running well. I decided to put some gas in the car (I had 1/8 tank) and this seemed to help. I'm thinking I must have got some trash in the gas I had, but that is all speculation. There was quite a bit of junk in the race gas I put in Friday night, so my filter very well could have got clogged up some. I proceeded to run the 11.19 after this, so all is well. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> I'm swapping out the fuel pump, fuel filter, and getting the injectors cleaned this week just to be sure.
I ran the 11.0 index and was ousted in the 2nd round because I slept at the light. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
http://www.minivette.com/SBSO/pages/DSCF0110.htm lol
I had a few people ask me if I was able to get the solid roller motor back in for the event. However, it wasn't to be since GTP still has the LS6 heads. <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> I was running a rebuilt 346ci (stock pistons/rods), GTP heads, TR230/224 hydraulic cam,etc... this weekend.
I'll have some pics and videos up soon!
It was fun putting some names with some faces. I was able to meet Camaroholic, Jason 98 TA, -Joseph-, BADZ, GS WS6 (MattG), Bad Habit Bird, Terry Burger, and a few others.
I can't wait for next year! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Jason
<small>[ April 08, 2003, 03:02 AM: Message edited by: Jason99T/A ]</small>
#2
TECH Fanatic
iTrader: (12)
Join Date: Nov 2001
Location: The Woodlands, TX
Posts: 1,934
Likes: 0
Received 0 Likes
on
0 Posts
Re: Spring Break Shootout results!
Good times for not so good weather <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> The coil pack relocation kit you put on the car looked SWEET. Good luck on the new setup.
#4
TECH Fanatic
iTrader: (2)
Re: Spring Break Shootout results!
Glad to see you had a good time.Sorry to hear you had some minor problems but think of it this way.
At least you didn't drop any muffler's on your head this time. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
When are you going to spray it?
At least you didn't drop any muffler's on your head this time. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
When are you going to spray it?
#6
TECH Senior Member
iTrader: (1)
Re: Spring Break Shootout results!
Good to meet you too, Jason. Your car was running well considering the humidity and heat around there. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I had a great time. My neck is still on fire from the sunburn tho. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> <- Me. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Andrew
I had a great time. My neck is still on fire from the sunburn tho. <img border="0" title="" alt="[Mad]" src="gr_images/icons/mad.gif" /> <- Me. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Cheers,
Andrew