1/4 time?
#1
Teching In
Thread Starter
Join Date: Aug 2002
Location: Minnesota
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
1/4 time?
Hey everybody i was going to go down to the track this weekend and was kinda hoping you guys could give me an estimate of what you think i should be running. I havent done a 1/4 yet but i have dynoed my car and got 382.4 hp and 385.6 tq at the wheels with these mods
B1 cam
Hooker lts with ory
Borla catback
computer tuning
asp crank pulley
slp lid
SSRA {ram air}
ported maf ends with bellows
slp subframe connectors
strut tower bar
Thanks, John
B1 cam
Hooker lts with ory
Borla catback
computer tuning
asp crank pulley
slp lid
SSRA {ram air}
ported maf ends with bellows
slp subframe connectors
strut tower bar
Thanks, John
#4
TECH Resident
iTrader: (13)
Join Date: Jan 2003
Location: Montgomery, TX
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1/4 time?
i would say very low 12's if you can hook up good and if you know how to drive decently. good luck man. <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" />
#7
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Cumming Ga.
Posts: 1,231
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1/4 time?
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Silver98Z28:
<strong> Do you think adding the 4.10's that i will be adding next week will help my times? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You might want to investigate the 4.10s more. With your mods you will be running pretty fast though the lights. I saw you have a cam and you might have raised your rev limiter but you might want to give a hard look at 3.73s.
I have run out of rpm with my 4.10s and the only mods I have are-lid, SLP Mass Air, U.D. Pulley and a few free mods. I'm up to 112mph, much more and I'll be looking for 28 inch tires.
With your mods, I would think you would be running at least 115mph{most likely a good bit better} depending on were your track is.
<strong> Do you think adding the 4.10's that i will be adding next week will help my times? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You might want to investigate the 4.10s more. With your mods you will be running pretty fast though the lights. I saw you have a cam and you might have raised your rev limiter but you might want to give a hard look at 3.73s.
I have run out of rpm with my 4.10s and the only mods I have are-lid, SLP Mass Air, U.D. Pulley and a few free mods. I'm up to 112mph, much more and I'll be looking for 28 inch tires.
With your mods, I would think you would be running at least 115mph{most likely a good bit better} depending on were your track is.