juiced92

is there anything i should know about before i put a LS1 in my 92 Camaro? will there be any serious mods that will have to be done or not? HELP

cyphur

iTrader: (10)

Check out the Conversions & Hybrids section. I know people have done this swap before.

juiced92

cool thanks

crainholio

iTrader: (2)

You'll need Spohn or custom-fabbed engine mounts, you'll need to upgrade your fuel pump to something (Walbro 340) that can make 58psi continuously, you'll need to either rework your own wiring harness or have Speartech or others do it, you'll need custom exhaust fabrication from the manifolds to at least the intermediate pipe, you'll need to adapt your Saginaw chassis fuel lines to quick-connect, and you'll need to fab up some wiring/relays to manage your cooling fan(s).

Other than that, it's a bolt-in.

Dave88LX

www.fuelinjection.com

They're in San Antonio. I know they make harnesses, they probably can do custom ones too, or hell might already have one for this.