tranny or converter?
#1
TECH Enthusiast
Thread Starter
iTrader: (16)
Join Date: Nov 2003
Location: Greensburg, PA
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
tranny or converter?
here's the deal, when my converter goes into lock up (40-45mph) the car will begin to shudder a bit and then kind of clunk into lock up. it only does it at about 1/2 to 3/4 throttle but not at WOT. now i'm not sure whether i should pull the converter and get it checked or get the tranny rebuilt. any ideas?
#3
TECH Apprentice
iTrader: (6)
Join Date: Apr 2004
Location: Charlottesville, VA
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Mine clunks when I am not feathering the throttle too, I would say around half throttle and it will clunk when it shifts into any gear. When I am WOT it is awesome, and I dont get any wierdness. I also get clunking at very low stop and go speeds, even pulling into parking spaces. It got worse after I scraped my car pretty bad going into someones driveway.
I am thinking that it is the tranny mount or whatever...
I am thinking that it is the tranny mount or whatever...
#4
The TC should not be locking up at higher throttle positions, that is why the shudder. The problem is with the computer, talk to Ed Wright at http://www.fastchip.com/ on how to solve this problem.
Last edited by Pro Built Automatics; 10-23-2004 at 03:14 AM.