Hi comp on 5.3 truck motor, got questions
#1
TECH Junkie
Thread Starter
iTrader: (2)
Join Date: Oct 2004
Location: Cornelius, NC
Posts: 3,473
Likes: 0
Received 0 Likes
on
0 Posts
Hi comp on 5.3 truck motor, got questions
I want to take off .05 on 5.3 heads going on a 5.3 truck motor.
what will comp ratio be and is that too much for an everyday. dont want any worries about running 93
what gaskets? will factory be ok? how about hardware with the added comp ratio ex. head bolts?
Planning on TR 224/224 cam what size push rods will I need, thinking 7.35?
The valves going in are 2.05 and 1.6 Im having them unshroud the sides of the combustion chamber, figure this should work with the dished pistons.
any input is welcome
what will comp ratio be and is that too much for an everyday. dont want any worries about running 93
what gaskets? will factory be ok? how about hardware with the added comp ratio ex. head bolts?
Planning on TR 224/224 cam what size push rods will I need, thinking 7.35?
The valves going in are 2.05 and 1.6 Im having them unshroud the sides of the combustion chamber, figure this should work with the dished pistons.
any input is welcome